Click to enlarge
Previous product
TSSGJ Solar Pump
Back to products
Next product
5TSC Solar Pump

TSSP Solar Pump

1.APPLICATION AREA:

This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and
living water. The living condition could be much improved. It also can be used for fountains.

2.MATERIAL OF PARTS:

Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U

3.ADVANCED TECHNOLOGY:

1.Application innovation
Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics innovation
Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.
3.Structure innovation
Oil filling, convenient installation and environmental protection

4.HIGHLIGHTS

a.Energy-saving and environment-protected green products
b.High technique products adopting MPPT and DSP chip technique.
c.100% copper wire, cold-rolled silicon steel sheet
d.CE certificate
e.Advanced three phase brushless DC motor
f.Stainless steel 316 screws
g.3 years warranty

5.PRINCIPLE OF OPERATION:

Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water

6.ADVANTAGES OF SOLAR PUMP SYSTEM:

A.It is easier and more widely used than any other dynamoelectric driven pumps.
B.It is more economical and more environmentally friendly.

7.MODEL SELECTION:

a.The power of solar panel = power of pump ×1.3
The voltage of solar panel = the voltage of pump
The controller should be matched
b.Select the batteries according to the following formulas:
The use hour of battery =
The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery
capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours
c.The battery capacity=
the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage
is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×（200÷12）=100AH

Add to Wishlist
Add to wishlist
SKU: PUM8926 Categories: , , , Tags: , , ,
Description

TSSP SOLAR PUMP1

Characteristic

TSSP SOLAR PUMP3

 

 

 

Shipping & Delivery

Related products

Close

QJD 4’’ Deep Well Pump

Performance Range
Max. Flow: 4.8m3/h Max. Head: 119m
Application Limits
1. Max. ambient temperature< 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 20m below the static water table.
Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Treble seal shield for excellent sand prevention; 2. High efficiency and lower power consumption; 3. Single phase motor with built in capacitor & thermal mode protector; 4. Pump sleeve with screw thread, single stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request No
Add to wishlist
Read more
Quick view
Close

3SE(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m
Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate
Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and Small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.
Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector; 3. Available with pump casing with plug, single stage floating impellers; 4. Installation in 3" or larger boreholes.
Optional available on request Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
Add to wishlist
Read more
Quick view
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Add to wishlist
Read more
Quick view
Close

Vertical Multi-Stage Centrifugal Pump

BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump) boasts characters of high efficiency, low noise, steady operation, etc. The hydraulic pump set adopts the non-self-priming vertical multi-stage structure, ensuring a compact body, easy installation, convenient operation and maintenance.
Add to wishlist
Read more
Quick view
Close

SHF(m) Centrifugal Pump

Performance Range 1. Max. Flow: 129m3/h 2. Max. Head: 22.5m Application Limits  1. Suction head up to 7m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 3bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc. Features 1. Large flow, high efficiency 2. Compact structure, easy to install Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Mechanical seal: Ceramic/Graphite/NBR rubber 4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 5. Protection: IP44 6. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Add to wishlist
Read more
Quick view
Close

Horizontal Multi-Stage Centrifugal Pump

BW, BWJ(T) stainless steel horizontal multistage centrifugal pumps are non-self priming pumps used for transporting liquid. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the horizontal process pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.
Add to wishlist
Read more
Quick view
Close

JET Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 80m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc. Features 1. The JET type self-priming pump 2. High suction, with short time 3. Different impeller material configuration Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Add to wishlist
Read more
Quick view
Close

6SS 6’’ Deep Well Pump

Performance Range
Max. Flow: 78m3/h Max. Head: 283m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 2. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 3. Available with controller box, bring about general protection; 4. Installation in 6" or larger boreholes. Optional Available On chamber is available with 3"or 4"
Add to wishlist
Read more
Quick view