Performance Curve
Please feel free to get in touch with us, our highly trained sales
team is here to help you with any inquiry. We are opened 6 days
a week 8am to 5pm, and on Saturdays 9:30am to 1pm.
4SS 4’’ Deep Well Pump
Performance Range
Max. Flow: 10.8m3/h
Max. Head: 330m
Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate
Application Fields
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4″ or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25″, 1.5″, 2″.
Related products
XPH Timing and Constant Temperature Circulation Pump
Performance Range
1. Max. Flow: 3.5m3/h
2. Max. Head: 6m
Application Limits
1. Liquid temperature: +2℃~+75℃
2. Maximum ambient temperature: +40℃
3. Maximum system pressure: 10bar
4. Protection level: IP44
5. Mains connection: 220V/50Hz, 220V/60Hz, 127V/60Hz
6. Insulation class: H
7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water
8. Installation: the motor shaft must be kept in horizontal direction
9. pH: 6.5 to 8.5
Certificate
Applications Fields
XPH series circulating pump is specifically designed for heating systems such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc.
Features
1. Low noise
2. No leakage
3. Timing operation
4. Temperature constant operation
5. Timing and temperature constant operation
Optional Available on Request
Brass pump body, enamel pump body, stainless steel pump body
Applications Fields
XPH series circulating pump is specifically designed for heating systems such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc.
Features
1. Low noise
2. No leakage
3. Timing operation
4. Temperature constant operation
5. Timing and temperature constant operation
Optional Available on Request
Brass pump body, enamel pump body, stainless steel pump body 
QGY(D) 4’’ Screw Pump
Performance Range
Max. Flow: 2.4m3/h
Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
3SG(m) 3’’ Deep Well Pump
Performance Range
Max. Flow: 3.6m3/h
Max. Head: 142m Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content (in mass fraction) up to 0.01%;
3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/Domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3" or larger boreholes.
Optional Available On Request
Oil chamber is available with Brass or SS304; Discharge chamber, Inlet parts are available with Casting or SS304.
Application Fields
1. Building/construction work/Domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3" or larger boreholes.
Optional Available On Request
Oil chamber is available with Brass or SS304; Discharge chamber, Inlet parts are available with Casting or SS304.
JET Self-Priming Jet Pump
Performance Range
1. Max. Flow: 6m3/h
2. Max. Head: 80m
Application Limits
1. Suction head up to 9m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc.
Features
1. The JET type self-priming pump
2. High suction, with short time
3. Different impeller material configuration
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc.
Features
1. The JET type self-priming pump
2. High suction, with short time
3. Different impeller material configuration
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
QJD 4’’ Deep Well Pump
Performance Range
Max. Flow: 4.8m3/h
Max. Head: 119m
Application Limits
1. Max. ambient temperature< 40℃;
2. Sand content (in mass fraction) up to 0.01%;
3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 20m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Treble seal shield for excellent sand prevention;
2. High efficiency and lower power consumption;
3. Single phase motor with built in capacitor & thermal mode protector;
4. Pump sleeve with screw thread, single stage floating impellers;
5. Installation in 4" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Treble seal shield for excellent sand prevention;
2. High efficiency and lower power consumption;
3. Single phase motor with built in capacitor & thermal mode protector;
4. Pump sleeve with screw thread, single stage floating impellers;
5. Installation in 4" or larger boreholes;
Optional Available On Request
No
3.5SG(m) 3.5’’ Deep Well Pump
Performance Range
Max. Flow: 6.0m3/h
Max. Head: 186m Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
2SGP(m) Centrifugal Pump
Performance Range
1. Max. Flow: 12m3/h
2. Max. Head: 50m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate: CE
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Double impeller centrifugal pump, satisfies the requirement of high head.
2. Compact structure
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic / Graphite / NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Double impeller centrifugal pump, satisfies the requirement of high head.
2. Compact structure
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic / Graphite / NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F 
PW-Z Self-Priming Peripheral Pump
Applications Fields
1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc.
Operating condition
1. Suction lift up to 8m
2. Liquid temperature ≤+90℃
3. Environment temperature ≤ +40℃
4. Max. working pressure: 5bar
Features and advantages
A self-priming peripheral pump for both hot and cold water.
Advanced structure with lower noise.
Intelligent control by both flow sensor and pressure sensor, which is convenient.
Materials
1. Pump body: Cast iron with stainless steel insert
2. Motor casing: Aluminum
3. Impeller: Brass
4. Shaft: Welded by SUS304 and Cs45#
5. Mechanical seal: Ceramic/Graphite/NBR
6. Copper winding