Characteristic
Please feel free to get in touch with us, our highly trained sales
team is here to help you with any inquiry. We are opened 6 days
a week 8am to 5pm, and on Saturdays 9:30am to 1pm.
4TSC Solar Pump
1.APPLICATION AREA:
This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and
living water. The living condition could be much improved. It also can be used for fountains.
2.MATERIAL OF PARTS:
Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U
3.ADVANCED TECHNOLOGY:
1.Application innovation
Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics innovation
Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.
3.Structure innovation
Oil filling, convenient installation and environmental protection
4.HIGHLIGHTS
a.Energy-saving and environment-protected green products
b.High technique products adopting MPPT and DSP chip technique.
c.100% copper wire, cold-rolled silicon steel sheet
d.CE certificate
e.Advanced three phase brushless DC motor
f.Stainless steel 316 screws
g.3 years warranty
5.PRINCIPLE OF OPERATION:
Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water
6.ADVANTAGES OF SOLAR PUMP SYSTEM:
A.It is easier and more widely used than any other dynamoelectric driven pumps.
B.It is more economical and more environmentally friendly.
7.MODEL SELECTION:
a.The power of solar panel = power of pump ×1.3
The voltage of solar panel = the voltage of pump
The controller should be matched
b.Select the batteries according to the following formulas:
The use hour of battery =
The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery
capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours
c.The battery capacity=
the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage
is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×（200÷12）=100AH
Related products
QGY(D) 4’’ Screw Pump
Performance Range
Max. Flow: 2.4m3/h
Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
4SS 4’’ Deep Well Pump
Performance Range
Max. Flow: 10.8m3/h
Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Vertical Multi-Stage Centrifugal Pump
BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump) boasts characters of high efficiency, low noise, steady operation, etc. The hydraulic pump set adopts the non-self-priming vertical multi-stage structure, ensuring a compact body, easy installation, convenient operation and maintenance.
AWZB Automatic Self-Priming Peripheral Pump
Performance Range
1. Max. Flow: 4.8m3/h
2. Max. Head: 50m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +90℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc.
Features
1. Automatic self-priming pump
2. Bulit-in check valve
3. Stainless steel 304 inserts
Motor
1. Single-Phase 220V/50Hz
2. Mechanical seal: Ceramic/Graphite/EPDM rubber
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc.
Features
1. Automatic self-priming pump
2. Bulit-in check valve
3. Stainless steel 304 inserts
Motor
1. Single-Phase 220V/50Hz
2. Mechanical seal: Ceramic/Graphite/EPDM rubber
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
3.5SG(m) 3.5’’ Deep Well Pump
Performance Range
Max. Flow: 6.0m3/h
Max. Head: 186m Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
SHF(m) Centrifugal Pump
Performance Range
1. Max. Flow: 129m3/h
2. Max. Head: 22.5m
Application Limits
1. Suction head up to 7m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 3bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
JET-G1 Self-Priming Jet Pump
Performance Range
1. Max. Flow: 6m3/h
2. Max. Head: 48m
Application Limits
1. Suction head up to 9m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. 304 stainless steel pressed tensile pump body & pump cover
2. Hydraulic optimization design, excellent performance
3. Nozzle, guide vane and the impeller PPO engineering plastics
4. Products are complete in specifications, meet drinking water standards
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
3. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. 304 stainless steel pressed tensile pump body & pump cover
2. Hydraulic optimization design, excellent performance
3. Nozzle, guide vane and the impeller PPO engineering plastics
4. Products are complete in specifications, meet drinking water standards
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
3. Other voltage or frequency is 60Hz 
SGT Centrifugal Pump
Performance Range
1. Max. Flow: 39m3/h
2. Max. Head: 52m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +60℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in industrial and urban water supply, high-rise building boosting, fire protection system, breeding
Features
1. Standard flange centrifugal pump
2. Large flow, high efficiency
Motor
1. Three-Phase 380V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available on Request
1. Motor whose insulation class is F
2. NSK bearing
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in industrial and urban water supply, high-rise building boosting, fire protection system, breeding
Features
1. Standard flange centrifugal pump
2. Large flow, high efficiency
Motor
1. Three-Phase 380V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available on Request
1. Motor whose insulation class is F
2. NSK bearing