Performance Curve
Please feel free to get in touch with us, our highly trained sales
team is here to help you with any inquiry. We are opened 6 days
a week 8am to 5pm, and on Saturdays 9:30am to 1pm.
XPS26 Three Speed Circulation Pump
Performance Range
1. Max. Flow: 4.5m3/h
2. Max. Head: 8m
Application Limits
1. Liquid temperature: +2℃～+110℃
2. Maximum ambient temperature: +40℃
3. Maximum system pressure: 10bar
4. Protection level: IP44
5. Mains connection: 115V/60Hz
6. Insulation class: H
7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water
8. Installation: the motor shaft must be kept in horizontal direction
9. PH: 6.5 to 8.5
Certificate
Applications Fields
XPS pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Examples of typical applications are mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc.
Features
1. 3-speed adjustment
2. Low noise
3. No leakage
Optional Available on Request
Enamel pump body, stainless steel pump body
Related products
6SE 6’’ Deep Well Pump
Performance Range
Max. Flow: 60m3/h
Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Available with pump casing with plug, integrated stage floating impellers;
3. Installation in 6" or larger boreholes.
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Available with pump casing with plug, integrated stage floating impellers;
3. Installation in 6" or larger boreholes.
Optional Available On Request
No
2SGP(m) Centrifugal Pump
Performance Range
1. Max. Flow: 12m3/h
2. Max. Head: 50m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate: CE
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Double impeller centrifugal pump, satisfies the requirement of high head.
2. Compact structure
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic / Graphite / NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Double impeller centrifugal pump, satisfies the requirement of high head.
2. Compact structure
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic / Graphite / NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F 
SGJW Self-Priming JET Pump
Performance Range
1. Max. Flow: 5.4m3/h
2. Max. Head: 52m
Application Limits
1. Suction head up to 9m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% f rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. Complete models
2. Copper impeller, stainless steel pump cover
3. Pump body with installation foot set
Motor
1. Single-Phase 220V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available On Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. Complete models
2. Copper impeller, stainless steel pump cover
3. Pump body with installation foot set
Motor
1. Single-Phase 220V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available On Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
PW-Z Self-Priming Peripheral Pump
Applications Fields
1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc.
Operating condition
1. Suction lift up to 8m
2. Liquid temperature ≤+90℃
3. Environment temperature ≤ +40℃
4. Max. working pressure: 5bar
Features and advantages
A self-priming peripheral pump for both hot and cold water.
Advanced structure with lower noise.
Intelligent control by both flow sensor and pressure sensor, which is convenient.
Materials
1. Pump body: Cast iron with stainless steel insert
2. Motor casing: Aluminum
3. Impeller: Brass
4. Shaft: Welded by SUS304 and Cs45#
5. Mechanical seal: Ceramic/Graphite/NBR
6. Copper winding
4SS 4’’ Deep Well Pump
Performance Range
Max. Flow: 10.8m3/h
Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
4SG(m) 4’’ Deep Well Pump
Performance Range
Max. Flow: 22m3/h
Max. Head: 454m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1.Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3.Available with cable with a motor plug, disassemble conveniently;
4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers;
5.Installation in 4" or larger boreholes;
Optional Available On Request
Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1.Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3.Available with cable with a motor plug, disassemble conveniently;
4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers;
5.Installation in 4" or larger boreholes;
Optional Available On Request
Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
3SE(m) 3’’ Deep Well Pump
Performance Range
Max. Flow: 3.6m3/h
Max. Head: 142m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content (in mass fraction) up to 0.01%;
3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/Domestic water supply;
2. Irrigation and Small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector;
3. Available with pump casing with plug, single stage floating impellers;
4. Installation in 3" or larger boreholes.
Optional available on request
Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
AWZB Automatic Self-Priming Peripheral Pump
Performance Range
1. Max. Flow: 4.8m3/h
2. Max. Head: 50m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +90℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc.
Features
1. Automatic self-priming pump
2. Bulit-in check valve
3. Stainless steel 304 inserts
Motor
1. Single-Phase 220V/50Hz
2. Mechanical seal: Ceramic/Graphite/EPDM rubber
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc.
Features
1. Automatic self-priming pump
2. Bulit-in check valve
3. Stainless steel 304 inserts
Motor
1. Single-Phase 220V/50Hz
2. Mechanical seal: Ceramic/Graphite/EPDM rubber
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz