Please feel free to get in touch with us, our highly trained sales
team is here to help you with any inquiry. We are opened 6 days
a week 8am to 5pm, and on Saturdays 9:30am to 1pm.
TSSP SOLAR PUMP
1.APPLICATION AREA:
This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and
living water. The living condition could be much improved. It also can be used for fountains.
2.MATERIAL OF PARTS:
Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U
3.ADVANCED TECHNOLOGY:
1.Application innovation
Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics innovation
Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.
3.Structure innovation
Oil filling, convenient installation and environmental protection
4.HIGHLIGHTS
a.Energy-saving and environment-protected green products
b.High technique products adopting MPPT and DSP chip technique.
c.100% copper wire, cold-rolled silicon steel sheet
d.CE certificate
e.Advanced three phase brushless DC motor
f.Stainless steel 316 screws
g.3 years warranty
5.PRINCIPLE OF OPERATION:
Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water
6.ADVANTAGES OF SOLAR PUMP SYSTEM:
A.It is easier and more widely used than any other dynamoelectric driven pumps.
B.It is more economical and more environmentally friendly.
7.MODEL SELECTION:
a.The power of solar panel = power of pump ×1.3
The voltage of solar panel = the voltage of pump
The controller should be matched
b.Select the batteries according to the following formulas:
The use hour of battery =
The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery
capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours
c.The battery capacity=
the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage
is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×（200÷12）=100AH
Tyre Model – RD25
Suitable for drive position
Designed for middle/long distance transportation on highway or paved roads
>Special pattern blocks design, providing superior driving and wet grip performance, safe, durable and powerful.
>Widened and deepened pattern design, optimized cap profile, superior service life, cost-effective.
>Low heat generation recipe, high-tensile casing steel cord structure design, superior durability, retreadability.
Tyre Model CA10
Suitable for all positions
Designed for bus on city roads
>Specialized pattern design, providing superior wet grip and braking performance.
>Special stripe design, providing even wearing under frequent braking.
>Thickened sidewall design, preventing tyre accidental damage.
>Reinforced bead design, providing bead durable performance under frequent braking.
Tyre Model GA26
Suitable for all positions
Designed for mid-short distance standard load transport on paved roads
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
>Zigzag circumferential grooves with lateral blocks, getting wet grip performance and traction on mixed road conditions.
>Durable tread formula, getting tear resistance on mixed road conditions, providing long mileage.
Tyre Model GA36
Suitable for all positions
Designed for mid-short distance heavy-duty transport on paved roads
>Unique zigzag pattern design, superior driving and irregular wear resistance.
>Optimized contact ground design, increasing uniform wear for longer service life.
>Low heat generation tread recipe, wider shoulder design, reducing shoulder separation effectively.
Tyre Model GA98
Suitable for all positions
Designed for mid-short distance heavy-duty transport on mixed road conditions
>Reinforced bead with nylon and strong carcass design for sizes with★★, 0 degree structure on shoulder, providing high quality and performance under heavy load conditions.
>Solid block pattern on shoulder, optimized longitudinal and lateral groove design, providing superior grip performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
Tyre Model GA98N
Suitable for all positions
Designed for mid-short distance heavy-duty transport on mixed road conditions
>Reinforced bead with nylon and strong carcass design , 0 degree structure on shoulder, providing high quality and performance under heavy load conditions.
>Solid block pattern on shoulder, optimized longitudinal and lateral groove design, providing superior grip performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
Tyre Model GD08
Designed for drive positions
Designed for mid-short distance heavy-duty transport on mixed road conditions
>Reinforced bead with nylon and strong carcass design for sizes with★★, 0 degree structure on shoulder, providing high quality and performance under heavy load conditions.
>Solid block pattern on shoulder, optimized longitudinal and lateral groove design, providing superior grip performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
Tyre Model GD08
Suitable for drive position
Designed for mid-short distance light truck on mixed roads
>Wide lateral groove design, providing superior grip performance on soft grounds.
>Deepened pattern design, durable tread recipe, providing superior service life, cost-effective.
Tyre Model GD08N
Suitable for drive position
Designed for mid-short distance heavy-duty transport on mixed road conditions
>Reinforced carcass and bead design, 0 degree structure on shoulder, providing high quality and performance under heavy load conditions.
>Solid block pattern on shoulder, optimized longitudinal and lateral groove design, providing superior grip performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
Tyre Model GD09
Suitable for drive positions
Designed for mid-short distance heavy-duty transport on mixed road conditions
>Solid pattern blocks on shoulder, optimized lateral grooves design, providing superior driving performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.
Tyre Model GD58
Suitable for drive position
Designed for mid-short distance standard load transport on paved roads
>Solid pattern blocks on shoulder, optimized lateral grooves design, providing superior driving performance, safe, durable and powerful.
>Low heat generation tread recipe, open shoulder design, reducing shoulder separation effectively.