Showing 1–12 of 52 results

Show sidebar
Close

2SGP(m) Centrifugal Pump

Performance Range 1. Max. Flow: 12m3/h 2. Max. Head: 50m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate: CE Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc. Features 1. Double impeller centrifugal pump, satisfies the requirement of high head. 2. Compact structure Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Mechanical seal: Ceramic / Graphite / NBR rubber 4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 5. Protection: IP44 6. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F
Close

3.5SE(m) 3.5’’ Deep Well Pump

Performance Range
Max. Flow: 7.2m3/h Max. Head: 169m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, integrated stage floating impellers; 5. Installation in 3.5" or larger boreholes; Optional Available On Request NO
Close

3.5SG(m) 3.5’’ Deep Well Pump

Performance Range Max. Flow: 6.0m3/h Max. Head: 186m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3.5" or larger boreholes; Optional Available On Request No
Close

3SE(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m
Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate
Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and Small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.
Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector; 3. Available with pump casing with plug, single stage floating impellers; 4. Installation in 3" or larger boreholes.
Optional available on request Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
Close

3SG(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features  1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3" or larger boreholes. Optional Available On Request Oil chamber is available with Brass or SS304; Discharge chamber, Inlet parts are available with Casting or SS304.
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Close

4SG(m) 4’’ Deep Well Pump

Performance Range
Max. Flow: 22m3/h Max. Head: 454m
Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1.Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3.Available with cable with a motor plug, disassemble conveniently; 4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5.Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Close

6SE 6’’ Deep Well Pump

Performance Range
Max. Flow: 60m3/h Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Available with pump casing with plug, integrated stage floating impellers; 3. Installation in 6" or larger boreholes. Optional Available On Request No
Close

6SS 6’’ Deep Well Pump

Performance Range
Max. Flow: 78m3/h Max. Head: 283m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 2. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 3. Available with controller box, bring about general protection; 4. Installation in 6" or larger boreholes. Optional Available On chamber is available with 3"or 4"
Close

APS Intelligent Frequency Converter Circulation Pump

Performance Range 1. Max. Flow: 3.5m3/h 2. Max. Head: 6m Application Limits  1. Liquid temperature: 2℃~110℃ 2. Maximum ambient temperature +40℃ 3. Maximum system pressure 10bar 4. Protection level: IP44 5. Mains connection: 220V 50Hz/60Hz 6. Insulation class: F 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  For domestic hot water system such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system and family hot, cold water pressurization circulation, etc. Features 1. "A" rated energy efficiency-lowest power consumption 2. Permanent magnet motor-intelligent frequency conversion control 3. Compact design, with control box integrated into the pump head 4. Proportional pressure mode(PP) 5. Constant pressure mode(CP) 6. Constant speed mode(S) 7. AUTO mode 8. Night-setback mode 9. Actual power display 10. Low noise, no leakage Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

AWZB Automatic Self-Priming Peripheral Pump

Performance Range 1. Max. Flow: 4.8m3/h 2. Max. Head: 50m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc. Features  1. Automatic self-priming pump 2. Bulit-in check valve 3. Stainless steel 304 inserts Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic/Graphite/EPDM rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz