Click to enlarge
Previous product
QDX-K1 Submersible Drainage Pump
Back to products
Next product
QDX-T Submersible Drainage Pump

QD Multi-stage Submersible Pump

Performance Range 

Max. Flow: 31m3/h
Max. Head: 120m

Application Limits 

1. Maximum liquid temperature +40℃
2. pH level from 6.5-8.5
3. Maximum sand content is 0.1%. Passage of suspended solids up to 0.2mm
4. Power frequency is 50Hz. Nominal voltage is 220VAC for single phase and 380VAC for three phase with the range from -10% to 10%.
5. Immersion depth from 0.5m-5m

Certificate

Application Fields 

Due to multi-stage structure, Q(D) series pumps with high pressure are widely applied in many fields, such as agricultural irrigation, sprinkler irrigation, garden irrigation, water supply for wells, reservoirs, aquaculture, etc.

Features

1. High head, multistage centrifugal pump
2. Compact structure, covering small area, convenient to move and use
3. The angular contact ball bearing, improving the service life

Optional Available On Request

Other voltage or frequency is 60Hz

Add to Wishlist
Add to wishlist
SKU: PUM8908 Categories: , , Tags: , , ,
Description

Performance Curves

5-2-multi-stage-submersible-pump-02

5-2-multi-stage-submersible-pump-03

5-2-multi-stage-submersible-pump-03

 

Shipping & Delivery

Related products

Close

PW-Z Self-Priming Peripheral Pump

Applications Fields 1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc. Operating condition 1. Suction lift up to 8m 2. Liquid temperature ≤+90℃ 3. Environment temperature ≤ +40℃ 4. Max. working pressure: 5bar Features and advantages A self-priming peripheral pump for both hot and cold water. Advanced structure with lower noise. Intelligent control by both flow sensor and pressure sensor, which is convenient. Materials 1. Pump body: Cast iron with stainless steel insert 2. Motor casing: Aluminum 3. Impeller: Brass 4. Shaft: Welded by SUS304 and Cs45# 5. Mechanical seal: Ceramic/Graphite/NBR 6. Copper winding
Add to wishlist
Read more
Quick view
Close

3.5SE(m) 3.5’’ Deep Well Pump

Performance Range
Max. Flow: 7.2m3/h Max. Head: 169m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, integrated stage floating impellers; 5. Installation in 3.5" or larger boreholes; Optional Available On Request NO
Add to wishlist
Read more
Quick view
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Add to wishlist
Read more
Quick view
Close

QGY(D) 4’’ Screw Pump

Performance Range
Max. Flow: 2.4m3/h Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Owned intellectual property of rubber stator, effective against the influence of thermal shock; 4. Installation in 4" or larger boreholes; Optional Available On Request No
Add to wishlist
Read more
Quick view
Close

JET-G1 Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 48m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc. Features 1. 304 stainless steel pressed tensile pump body & pump cover 2. Hydraulic optimization design, excellent performance 3. Nozzle, guide vane and the impeller PPO engineering plastics 4. Products are complete in specifications, meet drinking water standards Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Add to wishlist
Read more
Quick view
Close

QJD 4’’ Deep Well Pump

Performance Range
Max. Flow: 4.8m3/h Max. Head: 119m
Application Limits
1. Max. ambient temperature< 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 20m below the static water table.
Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Treble seal shield for excellent sand prevention; 2. High efficiency and lower power consumption; 3. Single phase motor with built in capacitor & thermal mode protector; 4. Pump sleeve with screw thread, single stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request No
Add to wishlist
Read more
Quick view
Close

Fully-integrated Intelligent Variable Frequency Pump

BW(J)E and BL(T)E series fully integrated intelligent variable frequency pump is a new generation of pressurized water supply equipment newly developed by us which highly integrates variable frequency controller, water pump and pressure tank; with handsome appearance, the pump has reached the international advanced level; provided with artificial intelligence, it can adjust automatically to meet the user’s requirement for constant pressure and variable frequency water supply, so as to keep constant the pressure of water supply network and maintain the whole system at the optimal energy-efficient state.
Add to wishlist
Read more
Quick view
Close

6SE 6’’ Deep Well Pump

Performance Range
Max. Flow: 60m3/h Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Available with pump casing with plug, integrated stage floating impellers; 3. Installation in 6" or larger boreholes. Optional Available On Request No
Add to wishlist
Read more
Quick view