Showing 13–24 of 85 results

Show sidebar
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Close

4SG(m) 4’’ Deep Well Pump

Performance Range
Max. Flow: 22m3/h Max. Head: 454m
Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1.Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3.Available with cable with a motor plug, disassemble conveniently; 4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5.Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Close

4TSC Solar Pump

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
Close

5TSC Solar Pump

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
Close

5TSS Solar Pump

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
Close

6SE 6’’ Deep Well Pump

Performance Range
Max. Flow: 60m3/h Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Available with pump casing with plug, integrated stage floating impellers; 3. Installation in 6" or larger boreholes. Optional Available On Request No
Close

6SS 6’’ Deep Well Pump

Performance Range
Max. Flow: 78m3/h Max. Head: 283m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 2. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 3. Available with controller box, bring about general protection; 4. Installation in 6" or larger boreholes. Optional Available On chamber is available with 3"or 4"
Close

AC/DC electric box

AC/DC electric box can make solar pump system to be dual purpose, it can change the power supply automatically. The application will be more convenient. It also can keep solar pump working at night or cloudy day.
Close

APS Intelligent Frequency Converter Circulation Pump

Performance Range 1. Max. Flow: 3.5m3/h 2. Max. Head: 6m Application Limits  1. Liquid temperature: 2℃~110℃ 2. Maximum ambient temperature +40℃ 3. Maximum system pressure 10bar 4. Protection level: IP44 5. Mains connection: 220V 50Hz/60Hz 6. Insulation class: F 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  For domestic hot water system such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system and family hot, cold water pressurization circulation, etc. Features 1. "A" rated energy efficiency-lowest power consumption 2. Permanent magnet motor-intelligent frequency conversion control 3. Compact design, with control box integrated into the pump head 4. Proportional pressure mode(PP) 5. Constant pressure mode(CP) 6. Constant speed mode(S) 7. AUTO mode 8. Night-setback mode 9. Actual power display 10. Low noise, no leakage Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

AWZB Automatic Self-Priming Peripheral Pump

Performance Range 1. Max. Flow: 4.8m3/h 2. Max. Head: 50m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc. Features  1. Automatic self-priming pump 2. Bulit-in check valve 3. Stainless steel 304 inserts Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic/Graphite/EPDM rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Close

AWZB-H1 Automatic Self-Priming Peripheral Pump

Performance Range 1. Max. Flow: 3.6m3/h 2. Max. Head: 44m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, tap-water boosting, water tower water supply, well water lifting, solar boosting, hot water pipe boosting, etc. Features 1. Automatic self-priming pump 2. Bulit-in check valve 3. Stainless steel 304 inserts Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic / Graphite / EPDM rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F