Showing 13–24 of 70 results

Show sidebar
Close

PW-Z Self-Priming Peripheral Pump

Applications Fields 1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc. Operating condition 1. Suction lift up to 8m 2. Liquid temperature ≤+90℃ 3. Environment temperature ≤ +40℃ 4. Max. working pressure: 5bar Features and advantages A self-priming peripheral pump for both hot and cold water. Advanced structure with lower noise. Intelligent control by both flow sensor and pressure sensor, which is convenient. Materials 1. Pump body: Cast iron with stainless steel insert 2. Motor casing: Aluminum 3. Impeller: Brass 4. Shaft: Welded by SUS304 and Cs45# 5. Mechanical seal: Ceramic/Graphite/NBR 6. Copper winding
Close

APS Intelligent Frequency Converter Circulation Pump

Performance Range 1. Max. Flow: 3.5m3/h 2. Max. Head: 6m Application Limits  1. Liquid temperature: 2℃~110℃ 2. Maximum ambient temperature +40℃ 3. Maximum system pressure 10bar 4. Protection level: IP44 5. Mains connection: 220V 50Hz/60Hz 6. Insulation class: F 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  For domestic hot water system such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system and family hot, cold water pressurization circulation, etc. Features 1. "A" rated energy efficiency-lowest power consumption 2. Permanent magnet motor-intelligent frequency conversion control 3. Compact design, with control box integrated into the pump head 4. Proportional pressure mode(PP) 5. Constant pressure mode(CP) 6. Constant speed mode(S) 7. AUTO mode 8. Night-setback mode 9. Actual power display 10. Low noise, no leakage Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

XPH Timing and Constant Temperature Circulation Pump

Performance Range 1. Max. Flow: 3.5m3/h 2. Max. Head: 6m Application Limits 1. Liquid temperature: +2℃~+75℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 220V/50Hz, 220V/60Hz, 127V/60Hz 6. Insulation class: H 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  XPH series circulating pump is specifically designed for heating systems such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc. Features 1. Low noise 2. No leakage 3. Timing operation 4. Temperature constant operation 5. Timing and temperature constant operation Optional Available on Request Brass pump body, enamel pump body, stainless steel pump body
Close

CPHB Hot Water Circulation Pump

Performance Range 1. Max. Flow: 10m3/h 2. Max. Head: 8m Application Limits  1. Liquid temperature: +2℃~+100℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 220V/50Hz 6. Insulation class: H 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields For hot water circulation system such as HVAC systems, solar hot water circulation system, boiler heating system, pressurization of domestic tap water, industry water circulation system, etc. Features 1. Flange connection 2. Low noise 3. No leakage Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

BPS Automatic Exhaust Circulation Pump

Performance Range 1. Max. Flow: 2m3/h 2. Max. Head: 7m Application Limits  1. Liquid temperature: +2℃~+95℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 220V/50Hz 6. Insulation class: H 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  For gas or electric hanging furnace hot water circulation system Features 1. 3-speed adjustment 2. Low noise 3. No leakage 4. Automatic exhaust 5. Various pump body structures applied to various types of installation Optional Available on Request Products can be customized according to customer's voltage and frequency.
Close

XP Single Speed Circulation Pump

Performance Range 1. Max. Flow: 30m3/h 2. Max. Head: 18m Application Limits  1. Liquid temperature: +2℃~+110℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 220V/50Hz, 380V/50Hz 6. Insulation class: F 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  For HVAC systems such as air energy hot water circulation system, solar hot water circulation system, boiler heating system, pressurization of domestic tap water, industry hot or cold water circulation system, etc. Features 1. Wet rotor, canned motor, low noise, no leakage 2. Silicon carbide friction pair, which is very wear-resisting Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

CPH Hot Water Circulation Pump

Performance Range 1. Max. Flow: 36m3/h 2. Max. Head: 30m Application Limits  1. Suction head up to 7m 2. Liquid temperature up to +100℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 7. Mains connection: 220V/50Hz, 380V/50Hz Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in HVAC, industrial circulating water system, solar hot water and boiler circulating system, living water supply, etc. Features 1. Pump body: Cast iron, electrophoretic treatment 2. Impeller: Cast iron, electrophoretic treatment 3. Shaft: 304 stainless steel welding shaft 4. Mechanical seal: SiC/Graphite/ FPM rubber 5. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 6. Protection: IP44 7. Insulation: B 8. NSK bearing
Close

XPS Three Speed Circulation Pump

Performance Range 1. Max. Flow: 10m3/h 2. Max. Head: 12m Application Limits  1. Liquid temperature: +2℃~+110℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 220V/50Hz, 220V/60Hz, 127V/60Hz 6. Insulation class: H 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. pH: 6.5 to 8.5 Certificate Applications Fields  XPS circulating pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Examples of typical applications are mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc. Features 1. 3-speed adjustment 2. Low noise 3. No leakage Optional Available on Request 1. Products can be customized according to customer's voltage and frequency 2. Brass pump body, enamel pump body, stainless steel pump body
Close

XPS26 Three Speed Circulation Pump

Performance Range 1. Max. Flow: 4.5m3/h 2. Max. Head: 8m Application Limits  1. Liquid temperature: +2℃~+110℃ 2. Maximum ambient temperature: +40℃ 3. Maximum system pressure: 10bar 4. Protection level: IP44 5. Mains connection: 115V/60Hz 6. Insulation class: H 7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water 8. Installation: the motor shaft must be kept in horizontal direction 9. PH: 6.5 to 8.5 Certificate Applications Fields  XPS pumps are designed for circulation of liquids in heating and air-conditioning systems. Pumps with bronze or stainless steel housings are also suitable for use in hot-water service systems. Examples of typical applications are mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system, etc. Features 1. 3-speed adjustment 2. Low noise 3. No leakage Optional Available on Request Enamel pump body, stainless steel pump body
Close

Q(D)Y-K2 Multi-stage Submersible Pump

Performance Range  Max. Flow: 34m3/h Max. Head: 127m Application Limits 1. Maximum liquid temperature +40℃ 2. pH level from 6.5-8.5 3. Maximum sand content is 0.1%. Passage of suspended solids up to 0.2mm 4. Power frequency is 50Hz. Nominal voltage is 220VAC for single phase and 380VAC for three phase with the range from -10% to 10%. 5. Immersion depth from 0.5m-5m Certificate Application Fields Due to multi-stage structure, Q(D)Y-K2 series pumps with high pressure are widely applied in many fields, such as agricultural irrigation, sprinkler irrigation, garden irrigation, water supply for wells, reservoirs, aquaculture, etc. Features 1. Oiled well pump motor structure, portable and durable. 2. The impeller and flow components are made of engineering plastics which apply to use in seawater. 3. High head, multistage centrifugal pump.
Close

QDX-L Submersible Drainage Pump

Performance Range Max. Flow: 61m3/h Max. Head: 33m Application Limits  1. Maximum liquid temperature +40℃ 2. pH level from 6.5-8.5 3. Maximum sand content is 0.1%. Passage of suspended solids up to 0.2mm 4. Power frequency is 50Hz. Nominal voltage is 220VAC for single phase and 380VAC for three phase with the range from -10% to 10%. 5. Immersion depth from 0.5m-5m Certificate Application Fields  With small size and light weight, the Q(D)X-L series pump is especially suitable for the rural wells water pumping, farmland irrigation and drainage, garden watering, water spraying and family households, as well as other applications such as industrial , construction, aquaculture, fish ponds, etc. Features 1. New-designed motor structure, longer service life. 2. Portable and durable aluminum alloy structure. 3. Alloy impeller of high performance engineering plastics or aluminum. Optional Available On Request 1. The stainless steel bottom cover 2. Single-phase could with floater switch 3. Other voltage or frequency is 60Hz
Close

WQ Multi-stage Submersible Sewage Pump

Performance Range  Max. Flow: 63m3/h Max. Head: 44m Application Limits  1. Maximum liquid temperature +40℃ 2. pH level from 4-10 3. Maximum liquid density 1.2×103kg/m3 4. Voltage fluctuation range ±10% 5. Immersion depth from 0.5m-5m Certificate Application Fields WQ(Single stage with high power) series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such as short fibers, paper scraps, etc. and soft solid, such as muddy water, dirty water, domestic wastewater, sewage, manure, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and site construction, but do not apply to the location with explosion-proof requirements. Features  1. Large power submersible sewage pump, the standard flange outlet. 2. Double channel impeller, good flowing capacity, excellent hydraulic performance. 3. Stainless steel shaft extension and carbide double side mechanical sealing. Optional Available on Request Other voltage or frequency is 60Hz